TE Series — E1 / T1 / PRI VoIP Gateway

Cost-effective E1/T1/PRI gateways that add the benefits of VoIP to a legacy ISDN telephone system.

TE100

TE200

Why this series

Built for reliable legacy-to-VoIP integration

Feature-rich

A robust feature set that meets varied needs and cuts communication cost.

Easy

Simple, intuitive web-based configuration saves setup time.

Reliable

Stable, with advanced hardware and software architecture.

Interoperable

Works with many softswitches & IP-PBXs, including Yeastar, Elastix & Lync.

Specifications

Models & specifications

  TE100 TE200
Models TE100 TE200
E1/T1/J1 Ports (Support PRI, E&M) 1 2
Protocol SIP (RFC3261)
Transport Protocol UDP, TCP, TLS, SRTP
Codec G.711 (alaw/ulaw), G.722, G.726, G.729A, GSM, ADPCM, Speex
Echo Cancellation ITU-T G.168 LEC Echo Cancellation, Dynamic Jitter Buffer
DTMF Mode RFC2833, SIP Info, In-band
Network DDNS, Firewall, PPPoE, Static IP, QoS, Static Route
Network Protocol FTP, TFTP, HTTP, SSH
PRI Switch Types Euro ISDN, National, Q.SIG
Caller ID BELL202, ETSI (V23), NTT (V23-Japan), and DTMF-based CID
LAN 1 10/100/1000Mbps
WAN 1 10/100/1000Mbps
Power Supply AC 100-240V (12V 2A)
Dimensions (L × W × H) (mm) 213 × 160 × 44
Operation Range 0°C to 40°C, 32°F to 104°F
Storage Range -20°C to 65°C, -4°F to 149°F
Humidity 10-90% non-condensing

Capabilities

Key features

  • Blocklist

  • Call Duration Limitation

  • Caller ID Prefix

  • Call Routing Rules

  • E1/T1/J1 Diagnostics

  • Firmware Upgrade by HTTP/TFTP

  • NAT Traversal

  • T.38 fax

  • SIP Trunk Support

  • SIP Registrar for IP phones

  • Web-based Configuration

  • Call Detail Record (CDR)

  • Caller ID

  • Configure backup/restore

  • Custom Prompts

  • Firewall

  • IP Blocklist

  • Packet Capture Tool

  • Trunk Group

  • SIP Peer Mode

  • System Logs

  • More Information in Datasheet

Ready to bridge your legacy lines to VoIP?

Tell us your existing setup and we’ll recommend the right Yeastar gateway.